Compressed Air for Spray Painting
Clean Air.Perfect Finish.
Professional compressed-air filtration for paint booths, automotive refinishing and industrial coating. Remove water, oil aerosols and fine particles before they reach your spray gun.
Water Removal
Remove liquid water and condensate before the air reaches the painting process.
Oil Aerosol Removal
Fine filtration helps reduce oil aerosols carried by compressed air.
Fine Filtration
High-quality configurations provide filtration down to 0.01 μm.
Finish Protection
Cleaner compressed air helps protect paint quality and process consistency.
PP Series
Clean compressed airat the point of use.
The PP paint filtration system is designed for purification of compressed air from solid particles, liquid contaminants and partially gaseous components before the air reaches sensitive painting equipment.
Modular filter combinations allow the air quality to be configured around the compressor system, upstream dryer and required painting process.
Point-of-use filtration
Final air treatment close to the spray application.
Pressure control
Integrated regulator and two quick couplings.
Technical Data
PP Seriesperformance & configuration.
Compact point-of-use air preparation for painting and other applications requiring controlled compressed-air quality.
78
Maximum flow
Nm³/h at 7 barg, 20°C
16
Operating pressure
bar maximum
½″
Connection
pipe size
1.5–65°C
Temperature range
operating
Standard Features
Ready for the paint line.
Available Models
Select the required air quality.
PP-207C
Dryer systemSeparator + microfilter configuration for high-quality compressed air when used with suitable upstream air treatment.
PP-207
Basic qualityMicrofilter and fine filtration configuration for point-of-use air treatment.
PP-307C
Dryer systemMulti-stage filtration configuration for high-quality compressed-air requirements.
PP-307
Activated carbonFine filtration with an activated carbon stage for demanding compressed-air applications.
Flow rating shown at 7 barg and 20°C. Actual capacity varies with operating pressure and installation conditions.
Complete Air Preparation
Clean air starts before the spray gun.
Paint quality depends on the complete compressed-air system. TechnoCore can combine compression, drying, filtration and point-of-use treatment around the actual air demand.
Compressor
Compressed-air supply
Air Dryer
Moisture control
Pre-filtration
Bulk contamination removal
PP System
Final point-of-use filtration
Spray Gun
Clean regulated air
Applications
Built for professional finishing.
Paint Booths
Compressed-air preparation for professional spray painting and refinishing.
Automotive Refinishing
Clean, regulated air for body shops and vehicle refinishing operations.
Industrial Coating
Air treatment for industrial painting and coating processes.
Metal Finishing
Air preparation for spray finishing of fabricated and machined components.
Furniture & Joinery
Cleaner compressed air for lacquer, coating and finishing applications.
General Industry
Point-of-use filtration where clean compressed air is required.
TechnoCore Engineering
More thanjust a filter.
We can review the complete compressed-air supply to the paint booth — compressor capacity, moisture removal, filtration, pressure control and distribution — and select the appropriate equipment for the application.
Discuss Your Air System →Assessment
Air demand and existing system review.
Selection
Dryer and filtration configuration.
Installation
Integration with the compressed-air system.
Support
Technical support for Irish customers.
Nationwide Industrial Support
Industrial SolutionsAcross Ireland
Based in Newtownmountkennedy, Co. Wicklow, TechnoCore supplies and supports paint booth and compressed air filtration systems for industrial customers throughout Ireland, including Dublin, Wicklow, Kildare, Meath, Wexford, Carlow, Kilkenny, Tipperary, Laois, Cork, Limerick, Shannon, Galway and Waterford.
Key industrial regions we support
Frequently Asked Questions
Paint booth air filtration.
Why does compressed air need filtration for spray painting?+
Compressed air can contain liquid water, oil aerosols and solid particles. If these contaminants reach the spray gun they can affect coating quality and contribute to paint defects. Correct air treatment helps provide cleaner and more consistent air at the point of use.
What is the maximum flow rate of the PP system?+
The PP-207C, PP-207, PP-307C and PP-307 configurations are rated up to 78 Nm³/h, or approximately 46 scfm, at 7 barg and 20°C according to the supplied technical data.
What is the maximum operating pressure?+
The PP series shown on this page has a maximum operating pressure of 16 bar.
What filtration level is available?+
Depending on configuration, the PP system can include filtration down to 0.01 μm. PP-307 configurations can also include an activated carbon stage for higher-quality air requirements.
Do I still need an air dryer?+
For high-quality compressed air, a suitable upstream air dryer is recommended as part of the overall air-treatment system. The correct configuration depends on compressor conditions, required air quality and the painting process.
Can TechnoCore size the complete system?+
Yes. TechnoCore can review compressor capacity, air demand, operating pressure, dryer requirements, filtration and point-of-use requirements to select an appropriate air-treatment configuration.
Paint Booth Air Quality
Improve the air behind your finish.
Send us your compressor capacity, operating pressure and paint booth air demand. TechnoCore can help select the appropriate dryer and filtration configuration.
Cookie preferences
TechnoCore uses necessary technologies to operate the website. With your permission, we also use analytics and advertising / conversion measurement technologies. You can accept all, reject optional cookies, or choose your preferences.
See our Privacy Policy.